战术导弹连射试验测控软件关键技术

针对导弹的多发连射试验,在单发导弹飞行试验实时测控软件系统的基础上,研究了I/O缓冲设置、多发射信号的接收与识别、第n发导弹数据处理时机等关键技术.解决了研发用于战术导弹连射试验测控软件系统中的多项难题,使得靶场实时测控软件系统能够满足多发导弹连射试验的航区安全控制需要.     

雷达智能BIT故障预测方法研究

在总结了几种比较常见的故障预测方法的基础上，介绍了基于统计学习理论的支持向量回归算法。提出将智能遗传算法用来对支持向量回归模型的参数进行优化选取，并详细介绍了模型参数的选取过程，避免了参数的盲目设置。将建立起来的模型应用于雷达智能BIT故障预测领域，并以一组智能BIT状态监测的数据对预测模型进行训练和验证，实验结果表明支持向量回归模型能有效地对雷达故障进行预测。     

维也里试验试纸颜色自动判读研究

针对传统维也里试验试纸颜色判读的不足,以颜色自动识别技术为基础,设计了维也里试验试纸颜色自动判读系统。结合维也里试验的特点和试纸颜色判读原理,从整体上给出了系统的工作原理和实现途径,并着重论述了颜色传感器的选择。     

添加剂对米糠油清净性和氧化安定性的影响

植物油是一种潜在的绿色润滑剂基础油，但其氧化安定性较差制约了它的应用。考察了清净剂和抗氧剂对米糠油高温清净性及氧化安定性的影响。结果表明：传统的含有金属离子的清净剂及抗氧抗腐剂对米糠油的高温清净性及氧化安定性没有提高，甚至会降低这两者性能；而不合金属离子的抗氧剂TL-57能改善这两者性能。     

大型降落伞拉直过程中的抽打现象分析

针对某大型降落伞回收系统主伞拉直过程中出现的抽打现象进行了分析,根据其拉直过程的特点将其划分为五个阶段,分别建立了各阶段的实体模型和约束模型,通过模型的组合建立了各阶段的多体动力学模型,将各阶段模型连接进一步组成该型号大型降落伞拉直全过程的动力学模型。仿真分析了该型号大型降落伞出现抽打现象时的伞衣位形、顶部伞衣速度、伞绳和伞衣的偏离距离以及张力的变化,总结了抽打现象形成时的一些特征数据,分析结果可为大型降落伞设计、改进、使用等提供参考。     

Phenomenological modelling of flow behaviour of 20MnMoNi55 reactor pressure vessel steel at cryogenic temperature with different strain rates

In the present study a phenomenological constitutive model is developed to describe the flow behaviour of 20MnMoNi55 low carbon reactor pressure vessel (RPV) steel at sub-zero temperature under different strain rates. A set of uniaxial tensile tests is done with the variation of strain rates and temperature ranging from 10⁻⁴ s⁻¹ to 10⁻¹ s⁻¹ and -80 °C to −140 °C respectively. From the experimental data, family of flow curves at different temperatures and strain rates are generated and fitted exponentially. The strain rate and temperature dependence of the coefficients of the exponential flow curves are extracted from these curves and characterised through a general phenomenological constitutive coupled equation. The coefficients of this coupled equation are optimised using genetic algorithm. Finite element simulation of tensile tests at different strain rates and temperatures are done using this coupled equation in material model of Abaqus FEA software and validated with experimental results. The novelties of proposed model are: (a) it can predict precisely the flow behaviour of tensile tests (b) it is a simple form of equation where fitting parameters are both function of strain rate ratio and temperature ratio, (c) it has ability to characterize flow behaviour with decreasing subzero temperatures and increasing strain rates.     

某型导发架通用测试系统软件复用性设计

测试软件的复用性是摆在测试界面前亟待解决的重要问题。运用统一建模语言(Unified Modeling Language,UML)对测试软件进行建模,包括:测试系统的类图、软件功能分解、功能子系统的上下文模型、测试软件需求特征树以及软件功能子系统的顺序交互视图。在Visual C++6.0环境中,采用"应用程序框架+可复用构件"开发方式,实现了基于可复用构件的某型导发架测试系统应用软件组装,成功解决了导发架测试领域内同一系列产品间测试软件的可复用问题。     

利用RLC电路合成高压方波脉冲

基于过阻尼RLC电路分时放电,提出了一种新型高压方波脉冲产生方法。理论分析表明过阻尼RLC电路产生的双指数电压波与PFL产生的方形电压波具有类似的上升沿和平顶。电路模拟表明通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台400 nF脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明样机可以在250 Ω电阻负载上输出幅值17 kV,平顶宽度330 ns~5.8 μs,上升沿100~ 350 ns 的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。     

Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024     

表面官能化对碳纳米管/环氧复合材料玻璃化转变温度及韧性的影响

通过碳纳米管的不同表面官能化,构造其与环氧树脂的不同界面。采用动态机械性能分析研究不同表面官能化碳纳米管对环氧树脂复合材料玻璃化转变温度的影响;采用摆锤冲击试验研究环氧树脂复合材料的韧性。结果表明:与纯环氧树脂相比,氨基化碳纳米管/环氧树脂复合材料的玻璃化转变温度升高,而羧基化碳纳米管/环氧树脂复合材料的玻璃化转变温度反而有所下降;碳纳米管/环氧树脂复合材料的冲击强度相比纯环氧树脂均提高了近一倍。复合材料性能的这些变化规律主要归因于不同表面官能化碳纳米管与环氧树脂基体间形成了不同的界面。